889 replies to this topic

[lkl20000]

keep getting this:

Exception in thread Thread-19:
Traceback (most recent call last):
File "threading.pyc", line 552, in __bootstrap_inner
File "Programs/1001/Abrosia.py.nc", line 705, in run
File "Programs/1001/Abrosia.py.nc", line 1004, in processNextTaskItem
File "HTMLParser.pyc", line 108, in feed
File "HTMLParser.pyc", line 148, in goahead
File "HTMLParser.pyc", line 229, in parse_starttag
File "HTMLParser.pyc", line 304, in check_for_whole_start_tag
File "HTMLParser.pyc", line 115, in error
HTMLParseError: malformed start tag, at line 1, column 46738

[Waser Lave]

keep getting this:

Exception in thread Thread-19:
Traceback (most recent call last):
File "threading.pyc", line 552, in __bootstrap_inner
File "Programs/1001/Abrosia.py.nc", line 705, in run
File "Programs/1001/Abrosia.py.nc", line 1004, in processNextTaskItem
File "HTMLParser.pyc", line 108, in feed
File "HTMLParser.pyc", line 148, in goahead
File "HTMLParser.pyc", line 229, in parse_starttag
File "HTMLParser.pyc", line 304, in check_for_whole_start_tag
File "HTMLParser.pyc", line 115, in error
HTMLParseError: malformed start tag, at line 1, column 46738

http://www.neocodex....sia-discussion/

[winstontiu]

I have to say this is a very useful tool, it simplifies what neocodex has to offer. The autobuyer is the best program in the set though...

[Mohawk]

I get this error in my preloader log.

Traceback (most recent call last):
  File "pre_loader.py", line 54, in <module>
  File "urllib2.pyc", line 126, in urlopen
  File "urllib2.pyc", line 394, in open
  File "urllib2.pyc", line 412, in _open
  File "urllib2.pyc", line 372, in _call_chain
  File "urllib2.pyc", line 1199, in http_open
  File "urllib2.pyc", line 1174, in do_open
urllib2.URLError: <urlopen error [Errno 10013] An attempt was made to access a socket in a way forbidden by its access permissions>

[jhg131]

Exception in thread Thread-28:
Traceback (most recent call last):
File "threading.pyc", line 530, in __bootstrap_inner
File "Programs/1038/SDBPricer.py.nc", line 122, in run
File "Programs/1038/SDBPricer.py.nc", line 329, in api_call
File "/cdx/svn/checkout/core/trunk/Program Manager/Lib/Encryption/__init__.py", line 34, in __new__
File "encodings/hex_codec.pyc", line 42, in hex_decode
TypeError: Odd-length string

Hello, I just tried the new SDB Pricer (which is a great idea btw, thanks), and I keep getting that message. On my 2 sides that I did before that I had about 20 pages and it would load most of the prices on the screen before it gave me the error message, but on my main, I have over 60 pages and it would show that error message right after it loaded all the pages but before any of them showed up in the screen.

[Waser Lave]

Is that on the Neopets login or the Neocodex login?

[iargue]

Make sure you login using the login for the forum, not your forum username. Change your password to not use special characters (Just letters and numbers) and see if that works.

[bluehawaii19]

I have an older version of the Program Manager and wanted to update it but when I click on the download link, it says that the page doesn't exist.

[Hydrogen]

I have an older version of the Program Manager and wanted to update it but when I click on the download link, it says that the page doesn't exist.

Which link are you clicking and from where? Try the link at the top left of our page . That's the correct link of where our program manager exists. If you give me the location of the link you're currently clicking, I'll remove it so that others aren't confused as well.

[bluehawaii19]

Which link are you clicking and from where? Try the link at the top left of our page . That's the correct link of where our program manager exists. If you give me the location of the link you're currently clicking, I'll remove it so that others aren't confused as well.

I actually just came to delete my post
I was trying the link provided on the first page but noticed the link at the top of every page and it works fine for me

EDIT: Glad I updated it. My old version kept freezing and wouldn't buy anything. Since updating, I have managed to get 3 items

Edited by bluehawaii19, 17 November 2012 - 10:14 PM.

[initialsHL]

My neopoints in this program always show ???? ???? ??? though, besides that, everything is great!

[GustavoH]

With the arrival of the newest program (Safety Deposit Box (SDB) Pricer) would be very useful if the neocodex Item database had information of new (r101) itens prices...

[bluehawaii19]

When I use Gormball, I occasionally get this error

Entered an unexpected state. Stopping. See HTML log.

[Zinkk]

Answered my own question.

Edited by Zinkk, 24 November 2012 - 02:23 PM.

[Waser Lave]

Answered my own question.

It works ok on Windows 8 then?

[Zinkk]

It works ok on Windows 8 then?

Yeah it didn't appear to have downloaded on the regular desktop but it showed up on my start screen and I was able to run it from there

[hayhaysarah]

I cannot even run the program. I keep getting the error
C:/Program Files (x86)\Neocodex\Manager\pre_loader.exe.log

[pabs123]

I keep getting this error when I try to run any program, it happens 2/3 times (happenned with abrosia, cellblock solver, shapeshifter solver, pyramids solver), im pretty sure it's some issue with the program manager:

Traceback (most recent call last):
File "/cdx/svn/checkout/core/trunk/Program Manager/ProgramManager.py", line 1211, in run_with_except_hook

[Concido]

I tried running the program on Windows 7 but nothing happens. I uninstalled my AV, firewall, running as admin, changing privilege level, using compatibility settings, etc. The installer works, but the executable doesn't.

[Waser Lave]

I tried running the program on Windows 7 but nothing happens. I uninstalled my AV, firewall, running as admin, changing privilege level, using compatibility settings, etc. The installer works, but the executable doesn't.

Try installing Python 2.7 and see if that helps.

[ShadowLink64]

I tried running the program on Windows 7 but nothing happens. I uninstalled my AV, firewall, running as admin, changing privilege level, using compatibility settings, etc. The installer works, but the executable doesn't.

Nothing? Not even an error message?

[Concido]

Nothing? Not even an error message?

Nope. Just plain doesn't run.
On Windows 8 (my laptop) it runs well.

http://www.youtube.com/watch?v=QCohcoA3mto&feature=youtu.be

Edited by Concido, 31 December 2012 - 09:59 AM.

[Waser Lave]

Did you try installing python?