3154 replies to this topic

[iPlay]

That's odd. What is she asking for?

I assume it's working fine for you? Then perhaps I'm doing something wrong
She's asking for a jewelled collar.

@Valorous - I am switching bots as a matter of fact, but maybe not enough? I'll try switching more often and post the results.

[Valorous]

The kitchenquest component is under testing phase.

[NaMasTe]

Valorous! I know this is asking alot but please please pleaseeeee work on your own versoin of AB .. thanks~

[Valorous]

Valorous! I know this is asking alot but please please pleaseeeee work on your own versoin of AB .. thanks~

Why? The one here seems to be sufficient.

 

I've now automated about 20 kitchen quests. None of them seem to be work doing in terms of rewards. There's still a bug when you let the quest timeout but other then that it's done.

Edited by Valorous, 21 May 2013 - 03:08 AM.

[Syntax]

This is a great suite, and I'd just like to say thank you for writing it.

 

That being said, I'm confused as to how the Kad Feeder works. Does it automatically refresh at the kads when it's meant to refresh? Or do you have to check out the timings first then tailor the time between searches? I've tried running it with default settings but it never feeds anything and comes back with everything unbuyable.

 

And might I suggest an option to run other bots while the kad feeder is running? When I feed legitly, I do other stuff like chat on the boards/rs while waiting for main, so maybe that'll make it look more legit and also save time in between bots.

[Valorous]

This is a great suite, and I'd just like to say thank you for writing it.

 

That being said, I'm confused as to how the Kad Feeder works. Does it automatically refresh at the kads when it's meant to refresh? Or do you have to check out the timings first then tailor the time between searches? I've tried running it with default settings but it never feeds anything and comes back with everything unbuyable.

 

And might I suggest an option to run other bots while the kad feeder is running? When I feed legitly, I do other stuff like chat on the boards/rs while waiting for main, so maybe that'll make it look more legit and also save time in between bots.

It refreshes whenever you set it to. Set the time to 3600 seconds for an hour.

[Syntax]

It refreshes whenever you set it to. Set the time to 3600 seconds for an hour.

 

Okay, so the time between searches is actually the interval that the program refreshes at?

[Valorous]

Okay, so the time between searches is actually the interval that the program refreshes at?

When utilizing that bot, yes.

[Syntax]

When utilizing that bot, yes.

So it'll randomly refresh between those intervals?

[mintpro]

Why? The one here seems to be sufficient.

 

I've now automated about 20 kitchen quests. None of them seem to be work doing in terms of rewards. There's still a bug when you let the quest timeout but other then that it's done.

Yeah, there's no profit involved with Kitchen Quests. But it usually gives some pet stat points so if you want to train your pet (hit point, str / def) then you can get those quite cheaply.

 

Speaking of profit, maybe a Faerieland Employment Agency automator? http://www.neopets.c...s&voucher=basic

 

I think the profit is too small to be worth it, but it would be nice for lazy people who want to increase their pet's job rank.

[Valorous]

A beta version of the kitchen quest bot has been added.

[Icarus]

Loving the shapeshifter solver the most.

 

Might I suggest you add a kiss the mortog autoplayer and/or a cliffhanger autoplayer.

[Adam]

Loving the shapeshifter solver the most.

 

Might I suggest you add a kiss the mortog autoplayer and/or a cliffhanger autoplayer.

That would be nice, seeing as the ones in the program manager will never work again ._.

Edited by Adam, 22 May 2013 - 06:38 PM.

[TheOneAndOnly]

I've recently got this. So far I have used the Auction sniper, Kitchen Quest, Rubbish Dump Grabber and Shape Shifter Solver.

 

I had no problems whatsoever with the last 2, they are great.

 

The problem I found with the Auction Sniper is the database. The prices are really out of wack, I bought a few items which were said to be thousands of NP profit. In reality they are 1NP or sub 1k price.

 

With the Kitchen Quest it started to look for items, however it said it could not find the first item. Perhaps it was unbuyable or above my total cost, if so it needs a different error message.

 

All in all though, the 4 bots are really good. Looking forward to more updates.

Ran Kitchen Quest again, Could not get accurate pricing for 'xxxxx'.

 

It's something worth just over 1k.

[Valorous]

I've recently got this. So far I have used the Auction sniper, Kitchen Quest, Rubbish Dump Grabber and Shape Shifter Solver.

 

I had no problems whatsoever with the last 2, they are great.

 

The problem I found with the Auction Sniper is the database. The prices are really out of wack, I bought a few items which were said to be thousands of NP profit. In reality they are 1NP or sub 1k price.

 

With the Kitchen Quest it started to look for items, however it said it could not find the first item. Perhaps it was unbuyable or above my total cost, if so it needs a different error message.

 

All in all though, the 4 bots are really good. Looking forward to more updates.

Ran Kitchen Quest again, Could not get accurate pricing for 'xxxxx'.

 

It's something worth just over 1k.

Don't use cached list. Create your own list. Additionally the pricing system requires some TLC that I don't presently have time to provide.

 

The Kitchen Quest bot is still in beta. It will only presently attempt to find the item once. This will change.

[TheOneAndOnly]

It's probably been covered but how would I go about making my own list?

[Valorous]

It's probably been covered but how would I go about making my own list?

Name|Cost
Pile Of Sludge|1
Fake Name|5000000

 

 

Edit: I've greatly reduced the amount of bad pricing incidents on my local build. I'll implement them after I'm sure it won't randomly spend 400,000np on a 6np item or something.

Edited by Valorous, 23 May 2013 - 02:03 PM.

[TheOneAndOnly]

For now I'm going to stick with the cached list I think.

 

Low on NP after buying the lab map, so I can't lose too much if anything goes wrong. Can always start a packrat thing going/save stuff in hope they go up in profit.

[Pand0rah]

The Money Tree Grabber right now is my favorite. I've managed to snag quite a few decent things with it.

Still a bit weary on the auction sniper from a few bad buys with it but I'm sure with more and more people using this the prices will figure themselves out, like you said.

[Icarus]

Just tested the rest of the programs.

Working A-Ok!

Really big thanks for this program!

[TheOneAndOnly]

Valorous, when running the auction sniper I get a lot of shop wizard bans. Is there anything I can do to prevent this? Or at the very least reduce it?

[gotvacien]

Valorous, when running the auction sniper I get a lot of shop wizard bans. Is there anything I can do to prevent this? Or at the very least reduce it?

no the way it works is it will check every item not in the db on the sw for a price the only way to reduce it would be have more people running the program to keep the database updated.

 

Bug Report:

1) the est profit on the sniper just appears to show the database price not the price - the purcase cost

2) it dosent seem to be succeeding in stocking the items anymore into the shop

 

Requests:

1) would it be possible to have it stock and price items at some point druing the sniping cycle because im starting on a new shell when my other one got iced for something nonrelated and it would be nice to not have to check ever hour or 2 if its out of money and then be forced to wait a bit for stuff to sell before i could start it back up again

2) can you make it check the est profit using the inflation varriable on the auto pricer same for when buying using the db

3) can you make an option so it will bid on ubs if they below a certain price so if something gets by cheep someone can snipe it

[Valorous]

no the way it works is it will check every item not in the db on the sw for a price the only way to reduce it would be have more people running the program to keep the database updated.

 

Bug Report:

1) the est profit on the sniper just appears to show the database price not the price - the purcase cost

2) it dosent seem to be succeeding in stocking the items anymore into the shop

 

Requests:

1) would it be possible to have it stock and price items at some point druing the sniping cycle because im starting on a new shell when my other one got iced for something nonrelated and it would be nice to not have to check ever hour or 2 if its out of money and then be forced to wait a bit for stuff to sell before i could start it back up again

2) can you make it check the est profit using the inflation varriable on the auto pricer same for when buying using the db

3) can you make an option so it will bid on ubs if they below a certain price so if something gets by cheep someone can snipe it

Bugs:

1) cachePriceAverage - wonCost

2) I'll look into it.

 

Requests:
1) The bots are presently independent modules. This will change and everything will become integrated eventually.

2) See request response 1.

3) It doesn't know the value of unbuyables so it can't bit on them. Create your own list for unbuyables and it will bid on them.

Edited by Valorous, 24 May 2013 - 11:23 AM.

[mrcoconut]

Very nice indeed 

[gotvacien]

Bugs:

1) cachePriceAverage - wonCost

2) I'll look into it.

 

Requests:
1) The bots are presently independent modules. This will change and everything will become integrated eventually.

2) See request response 1.

3) It doesn't know the value of unbuyables so it can't bit on them. Create your own list for unbuyables and it will bid on them.

Bugs:

1) are you sure [24/05/2013 2:57:00 PM] AuctionSniper Bidder: Lu Codestone(178988359) Won @ 5,003 NP. Est Profit: 9,626 NP.

vo is the most expensive codestone and its price averages 12k-13k nps Lu only averages 11k-12.5k nps something might be off on your caching then or it found a really high price and threw you average off you should make it ignore the bottom and top 5% before factoring the average to make it more realistic

2) seems to have fixed itself when i restarted my computer but the auto pricer dosent look like its working

 

requests:

1 & 2) alright

3) thats why you have a user set variable and  use that variable as the value for all unbuyables id assume most people would only set it to 10-50k its a bit of a gamble risk but it could potentially pay off and the majority of items that won show up on the sw will go for that unless its a new item that will have its price deflate in a few weeks im sure alot of people would agree with me and setting a list for all unbuyables is not very feasible as there are over 5000 of them it would take forever to make its just as easy to make it set it to 1 or 0 to effectively make it not bid on any unbuyable

Edited by gotvacien, 24 May 2013 - 12:43 PM.