Quantcast

What works and what is paused · Email is limited to account activation and password resets.

Jump to content


Photo

Just Bought Advanced. I know this has been discussed before... but


  • Please log in to reply
30 replies to this topic

#1 zhihao12

zhihao12
  • 20 posts

Posted 30 December 2012 - 05:11 PM

Traceback (most recent call last):
File "/cdx/svn/checkout/core/trunk/Program Manager/ProgramManager.py", line 1211, in run_with_except_hook
File "Programs/1001/Abrosia.py.nc", line 720, in run
File "Programs/1001/Abrosia.py.nc", line 970, in processNextTaskItem
File "Programs/1001/Abrosia.py.nc", line 2343, in visitShopMain
AttributeError: Abrosia got logged out and login failed, so program was forcibly aborted.

Abrosia crashed every 30mins for me, and if I can't leave it open (since I'm out most of the time), there's no point. I don't have the luxury of sitting in front of my comp to babysit the ABer for 6 hours a day.

As I suppose you guys know, in this bug, neopets doesn't actually "log out". The bug is that users suddenly go to a blank login page, but by simply Refreshing they will go to the page they wanted to go. They aren't actually really logged out.

Other ABers that I used, they don't abort after being "logged out", the program just refreshes again and continues as per normal.

I hope abrosia can be fixed??

rum

Advertisement

    #2 KingHeisenberg

    KingHeisenberg
    • 93 posts

    Posted 30 December 2012 - 05:24 PM

    Hmm, my abrosia logs out, but it just autologs back in for me.

    #3 Teru

    Teru
    • 239 posts

    Posted 30 December 2012 - 05:47 PM

    If your autobuying for 6 hours a day hopefully your taking breaks inbetween instead of running it for 6 hours straight.

    #4 zhihao12

    zhihao12
    • 20 posts

    Posted 30 December 2012 - 05:52 PM

    Hmm, my abrosia logs out, but it just autologs back in for me.


    How can i set mine to autolog back without crashing?

    If your autobuying for 6 hours a day hopefully your taking breaks inbetween instead of running it for 6 hours straight.


    Thanks for the advice :)

    #5 Teru

    Teru
    • 239 posts

    Posted 30 December 2012 - 06:03 PM

    Try to make your autobuying look as humanly as possible.. when your taking a break do whatever you like doing on neopets until your ready to start up autobuying again. Just try restarting the entire program and see if that helps.. other than that neopets website has been pretty glitchy so its not the programs fault.

    #6 zhihao12

    zhihao12
    • 20 posts

    Posted 30 December 2012 - 06:07 PM

    Try to make your autobuying look as humanly as possible.. when your taking a break do whatever you like doing on neopets until your ready to start up autobuying again. Just try restarting the entire program and see if that helps.. other than that neopets website has been pretty glitchy so its not the programs fault.


    As I've said, I don't have the luxury of sitting in front of my comp to babysit the ABer for 6 hours a day. An ABer SHOULD be able to run in the background without babysitting... so you can't say "its not the programs fault". I've also mentioned that neopets doesn't actually log out, so either add an auto re-login or program to refresh and not abort...

    #7 Rainie

    Rainie
    • 854 posts

    Posted 30 December 2012 - 06:12 PM

    If your autobuying for 6 hours a day hopefully your taking breaks inbetween instead of running it for 6 hours straight.


    I always leave Abrosia on for hours~

    Anyways, if you know that this has been discussed before then why are you creating another topic about it? There's a search bar you know

    Edited by Rainie, 30 December 2012 - 06:14 PM.


    #8 Mishatu

    Mishatu
    • 346 posts

    Posted 30 December 2012 - 06:12 PM

    You're not supposed to babysit it. Turn it on, walk away for an hour or two, then come back and turn it off. We even have a new remote abrosia controller so you can do it from your phone.

    Babysitting is exactly what people are supposed to not do.

    #9 Rainie

    Rainie
    • 854 posts

    Posted 30 December 2012 - 06:16 PM

    You're not supposed to babysit it. Turn it on, walk away for an hour or two, then come back and turn it off. We even have a new remote abrosia controller so you can do it from your phone.

    Babysitting is exactly what people are supposed to not do.


    You make it seem like "babysitting" it is a sin-- it's not. If people want to do that, then fine, there's nothing wrong with it.

    #10 Mishatu

    Mishatu
    • 346 posts

    Posted 30 December 2012 - 06:18 PM

    You make it seem like "babysitting" it is a sin-- it's not. If people want to do that, then fine, there's nothing wrong with it.


    It's not really the babysitting that's a problem. It's the "OMG I'VE BEEN RUNNING IT FOR 30 SECONDS AND IT HASN'T BOUGHT ANYTHING. WHAT'S WRONG WITH IT???" that appears semi-frequently in IRC.

    #11 ShadowLink64

    ShadowLink64
    • 16735 posts


    Users Awards

    Posted 30 December 2012 - 06:34 PM

    What does Neopets look like when the login fails anyway? Does it just look like a regular page, except that you're not logged in? And is a "blank" page actually blank, or is there still some partial HTML source code on the page?

    I don't play the game at all, so I need people to tell me what is going on exactly in Neo Land.

    #12 zhihao12

    zhihao12
    • 20 posts

    Posted 30 December 2012 - 07:19 PM

    What does Neopets look like when the login fails anyway? Does it just look like a regular page, except that you're not logged in? And is a "blank" page actually blank, or is there still some partial HTML source code on the page?

    I don't play the game at all, so I need people to tell me what is going on exactly in Neo Land.


    When you try to access a any neopets link when you're not logged in, THAT page. Yellow neopets with the option to ask you to SIGN UP or to Log In. In the glitch (which has been happening for a few months already), you just have to REFRESH and you will go to the page you wanted to go to because you are not actually logged out.

    You're not supposed to babysit it. Turn it on, walk away for an hour or two, then come back and turn it off. We even have a new remote abrosia controller so you can do it from your phone.

    Babysitting is exactly what people are supposed to not do.


    Abrosia aborts in about 20minutes for me.

    It's not really the babysitting that's a problem. It's the "OMG I'VE BEEN RUNNING IT FOR 30 SECONDS AND IT HASN'T BOUGHT ANYTHING. WHAT'S WRONG WITH IT???" that appears semi-frequently in IRC.


    Hmm? Been ABing for years.

    #13 Strategist

    Strategist
    • Sadmin

    • 10013 posts


    Users Awards

    Posted 30 December 2012 - 07:20 PM

    This is what you get Slink. I'll pm you the source code for it.

    Posted Image

    #14 ShadowLink64

    ShadowLink64
    • 16735 posts


    Users Awards

    Posted 30 December 2012 - 07:21 PM

    Alright, and it works just fine after one refresh? Is there a possibility of needing multiple refreshes for it to be "logged in" again?

    #15 Strategist

    Strategist
    • Sadmin

    • 10013 posts


    Users Awards

    Posted 30 December 2012 - 07:22 PM

    Nah just one I believe mate ;)

    #16 ShadowLink64

    ShadowLink64
    • 16735 posts


    Users Awards

    Posted 30 December 2012 - 07:38 PM

    Alright, I'll try and figure out a good way to fix this.

    EDIT: Restart the Program Manager and see if that helps. I made an update. It's not the best fix in the world, but it should be good for now.

    #17 zhihao12

    zhihao12
    • 20 posts

    Posted 30 December 2012 - 07:54 PM

    Alright, and it works just fine after one refresh? Is there a possibility of needing multiple refreshes for it to be "logged in" again?


    There have been occasions (although not often) where I had to refresh twice or trice to get past it.. I'm guessing it's a probability game.. the glitch can happen twice in a row.

    Alright, I'll try and figure out a good way to fix this.

    EDIT: Restart the Program Manager and see if that helps. I made an update. It's not the best fix in the world, but it should be good for now.


    Thank you so much :) Will test it and update here

    Edited by zhihao12, 30 December 2012 - 07:54 PM.


    #18 ShadowLink64

    ShadowLink64
    • 16735 posts


    Users Awards

    Posted 30 December 2012 - 11:38 PM

    *hopes zhihao12 is happily ABing away without any errors now*

    #19 zhihao12

    zhihao12
    • 20 posts

    Posted 31 December 2012 - 03:25 AM

    I was ABing with another Aber, but now I'm gonna test :)

    #20 Waser Lave

    Waser Lave
    • 25516 posts


    Users Awards

    Posted 31 December 2012 - 08:19 AM

    I was ABing with another Aber, but now I'm gonna test :)


    Traitor! :o

    #21 zhihao12

    zhihao12
    • 20 posts

    Posted 31 December 2012 - 10:02 AM

    Just came back from countdown party, I left Abrosia on for 6 hours, came back and got the same error.. the Aber ran for only 15minutes and bought only 1 item.

    Traceback (most recent call last):
    File "/cdx/svn/checkout/core/trunk/Program Manager/ProgramManager.py", line 1218, in run_with_except_hook
    File "Programs/1001/Abrosia.py.nc", line 720, in run
    File "Programs/1001/Abrosia.py.nc", line 970, in processNextTaskItem
    File "Programs/1001/Abrosia.py.nc", line 2353, in visitShopMain
    AttributeError: Abrosia got logged out and login failed, so program was forcibly aborted.

    #22 ShadowLink64

    ShadowLink64
    • 16735 posts


    Users Awards

    Posted 31 December 2012 - 10:09 AM

    Alright, we're going to have to do some more deeper-level debugging, since it would have tried three times that point.

    I am assuming you are running Windows. Where you click the Program Manager, can you right click it, and hit Properties? Then where it says target, add debug=1 on the end like this:

    Posted Image
    Once you're done that, click OK at the bottom, and run the Program Manager from the shortcut again. Then, run the autobuyer until it says you have "forcibly logged out".

    Now, If you go to c:\Program Files (x86)\Neocodex\Manager\, you will see a HTTPWrapper_Debug folder full of html files. Could you package that all up in a zip file and e-mail it to [email protected]? :p That will show me exactly what the HTML looks like when the error is created.

    (Anyone else having this problem, please do this.)

    Remember to remove debug=1 once finished, or you will build up a lot of HTML files. ;P

    #23 zhihao12

    zhihao12
    • 20 posts

    Posted 31 December 2012 - 10:23 AM

    Wow, fast reply :)

    I've done what you said and ran the ABer. if it doesnt crash tonight it will the next morning. Then I'll send it right away :)

    #24 ShadowLink64

    ShadowLink64
    • 16735 posts


    Users Awards

    Posted 31 December 2012 - 10:25 AM

    Awesome, thanks. Hopefully there's not too many HTML files. :p If so, I'd probably need the newest 10 or so in that folder. But if you can send the entire thing, that's fine too.

    #25 zhihao12

    zhihao12
    • 20 posts

    Posted 31 December 2012 - 05:24 PM

    Awesome, thanks. Hopefully there's not too many HTML files. :p If so, I'd probably need the newest 10 or so in that folder. But if you can send the entire thing, that's fine too.


    Wow, there's SO MANY files. hahaa. I just sent it!


    1 user(s) are reading this topic

    0 members, 1 guests, 0 anonymous users