1161 replies to this topic

[Sweeney]

the program worked fine for me for 2 messages (both triples with 6 chars), and now that i'm working on a 3rd message (another triple with 6 chars), none of the combos outputed work when i tried them...help? suggestions?

i had to type in the mods manually for this 3rd message because trying to type in the phtml link didn't work this time...i've double-checked and my mods are correctly entered.

Well, they're obviously not, otherwise it would work.
There is nothing wrong with the program's functionality.

[wutwut]

Well, they're obviously not, otherwise it would work.
There is nothing wrong with the program's functionality.

Oh i'm not doubting its functionality since it previously worked. Just wondering if anyone had any advice or alternatives to manually inputing mods when the link isn't working...(goes straight to the login page).

[Hydrogen]

ok i have downloaded those 2 links but when i go to open the dr sloth decoder this is that i get:

Codex Check Module Version: 3.1.4.0
DLL Set-up Error -RunCodexCheck- 0 - Please Check you have the Required Files

am i supposed to have something running before i click on the dr sloth decoder? im sorry, i am probably a total noob about this but i really dont know what i have done wrong...

Please read Mumei's FAQ for more information regarding your problem

http://www.neocodex....showtopic=49276

[nemira]

Did you download CodexChecks?




Did you download CodexChecks?

been there done that... now what?

[Hydrogen]

been there done that... now what?

If everything is installed, and you try to run the program what does it say? Can you post a screenshot?

[nemira]

If everything is installed, and you try to run the program what does it say? Can you post a screenshot?

i was just asking what to do next it didn't give me anything. now it askes for the username

[Hydrogen]

i was just asking what to do next it didn't give me anything. now it askes for the username

So enter in your codex username and password...then click login and then proceed to use the program?

[nemira]

So enter in your codex username and password...then click login and then proceed to use the program?

now it works. thank you!

[Hydrogen]

now it works. thank you!

Oh cool . Good luck .

[Caelest]

Just wanted to say thanks for the great program! I've done most of them manually and used the program for the ones I've been stumped on. Thanks again!

[RockerChick77xxx]

hey guys, I have a problem.
Ive already decoded the singles and doubles and i'm trying to do my first triple and I'm positive I put all the info in there right but when I click solve nothing happens..

Edited by RockerChick77xxx, 12 February 2008 - 02:17 PM.

[RombaGirl]

Great program, helped me a lot
I've just finished the last step of the plot, waiting for more

hey guys, I have a problem.
Ive already decoded the singles and doubles and i'm trying to do my first triple and I'm positive I put all the info in there right but when I click solve nothing happens..

Check that the triple you're trying to solve doesn't have "incomplete data" in the end of it, if it does, move to the next one

[Hydrogen]

Just wanted to say thanks for the great program! I've done most of them manually and used the program for the ones I've been stumped on. Thanks again!

Now stick around the forums and enjoy the rest of the community here .

[Gingivitis]

Laser Wave is a god.

[Sweeney]

Laser Wave is a god.

An unusual opinion

[tunss13]

can anyone help me? When i click to open the decoder this message comes up "codexk check module version: 3.1.4.0 DLL set-up error-runcodexchecks-0-please check you have the required file" What do i need to do??

[gael_090]

i REALLY DON'T KNOW HOW TO FILL THE MODIFIER LIST IT'S LIKE WIERD..................ANY HELP??
WHAT GOES IN THE I TRIED LOTS OF STUFFF BUT I JUST GET SCPIPT ERROR "9"
ANY HELP??

[Sweeney]

i REALLY DON'T KNOW HOW TO FILL THE MODIFIER LIST IT'S LIKE WIERD..................ANY HELP??
WHAT GOES IN THE I TRIED LOTS OF STUFFF BUT I JUST GET SCPIPT ERROR "9"
ANY HELP??

I know this great facility in Minnesota... not sure how close that is to you though...
Obviously, they have residential programmes, but they do cost extra.

Edited by Sunscorch, 12 February 2008 - 03:44 PM.

[Hydrogen]

can anyone help me? When i click to open the decoder this message comes up "codexk check module version: 3.1.4.0 DLL set-up error-runcodexchecks-0-please check you have the required file" What do i need to do??

Read Mumei's FAQ: http://www.neocodex....showtopic=49276

i REALLY DON'T KNOW HOW TO FILL THE MODIFIER LIST IT'S LIKE WIERD..................ANY HELP??
WHAT GOES IN THE I TRIED LOTS OF STUFFF BUT I JUST GET SCPIPT ERROR "9"
ANY HELP??

Read the first page of the topic. It has a guide on how to use the program

[sarap]

*giggles* Minnesota eh? Is it a mental palce too?

Ok First, my program works great on the 3mods. Wish I had it when I did my puzzles.

But I can't keep up with all the help I'm giving around neopets and here, so I'm going to ask that anyone needing help to figure out how to send me a message here on NeoCodex in my email box.
I am not able to be online all day, so I might take a while to answer anyone, ok?
And that anyone needing help only ask for help with 3mods. And give me the message ID.
Take the message ID (which is above the Key and Target) and enter it at the end of this link:
www.neopets.com/space/ros/puz2_data.phtml?id=
Put the message ID after the = sign, and then send me a mail of all that code in the screen.
REMEMBER, I might not answer right away! I am not always online!

Edited by sarap, 12 February 2008 - 04:08 PM.

[Sweeney]

*giggles* Minnesota eh? Is it a mental palce too?

Ok First, my program works great on the 3mods. Wish I had it when I did my puzzles.

But I can't keep up with all the help I'm giving around neopets and here, so I'm going to ask that anyon needing help to either figure out how to send me a message here on NeoCodex in my email box or send me a neomail in neopets where my nam is -removed-
I am not able to be online all day, so I might rak a while to answer anyone, ok?
And that anyone needing help only ask for help with 3mods. And give me the message ID.
Take the message ID (which is above the Key and Target) and enter it at the end of this link:
www.neopets.com/space/ros/puz2_data.phtml?id=
Put the message ID after the = sign, and then send me a mail of all that code in the screen.
REMEMBER, I might not answer right away! I am not always online!

We appreciate you offering to help everyone, but posting your neopets username is a bad idea.

Also, I want to point out that you're a backwards pokemon

[Hydrogen]

We appreciate you offering to help everyone, but posting your neopets username is a bad idea.

Also, I want to point out that you're a backwards pokemon

Oh shit. My respect for you just went up 10 fold.

[sarap]

We appreciate you offering to help everyone, but posting your neopets username is a bad idea.

Also, I want to point out that you're a backwards pokemon

Thanks for the tip Sunscorch. I didn't know that, so I went back and did an edit on my message.

And a backwards pokemon? Erm, been a long time since I've been into pokemon. Is there some pokemon that I don't know about? And if it has to do with my neopets screen name, then you can just email me the name of the pokemon, lol
*kicks the e key on keyboard* Darn thing doesn't work sometimes.

[Hydrogen]

Thanks for the tip Sunscorch. I didn't know that, so I went back and did an edit on my message.

And a backwards pokemon? Erm, been a long time since I've been into pokemon. Is there some pokemon that I don't know about? And if it has to do with my neopets screen name, then you can just email me the name of the pokemon, lol
*kicks the e key on keyboard* Darn thing doesn't work sometimes.

The pokemon he is talking about is paras. Your name is sarap .

I posted a pic above .

[sarap]

The pokemon he is talking about is paras. Your name is sarap .

I posted a pic above .

OHHH, now I get it, *giggles*
I remember that one but didn't remember it's name, lol
Cute, so yaa I can get a bit crabby at times