1161 replies to this topic

[Gingivitis]

After I pass Codex Checks, the program immediately exits.

[sarap]

As a reminder, the link you need to access your data is here



www.neopets.com/space/ros/puz2_data.phtml?id



Just add your message ID after the = sign. If it comes up a blank page, then double check you got the message ID right Some people are using the letter O when it should be the number 0. And some people are using the lower case L letter when it should be the number 1 inside the message ID



And if you have problems getting the Laser program to work, you can post your message ID info from that link on here, and I'm sure some nice person might com along and do it for you!

[Gingivitis]

I will pm it to someone, not just post it.

[chalupabatman]

I will pm it to someone, not just post it.

You can send the info to me

[ShadowLink64]

I can do them too, just send a message to my PM box and I'll get back to you when I can.

[Sora]

what happens when the numbers appear on the decoder? i have like 10 or so. maybe i'm not doing this right.
i'll try to read the guides but please help me?

[ShadowLink64]

what happens when the numbers appear on the decoder? i have like 10 or so. maybe i'm not doing this right.
i'll try to read the guides but please help me?

The numbers are the combinations that you need to try out. There are a few to try out, but usually one of the first few work. First number - the modifier number to put in the first spot, second number is the number of the 2nd modifier, etc.

[Sora]

oh ok. but whats with the 18-5-13 thingy next to it?

[ShadowLink64]

oh ok. but whats with the 18-5-13 thingy next to it?

What exactly is it outputting? (just post everything if you can copy/paste) Did you try putting modifier 18, then 5, then 13 in the first, second and third spots?

[Sora]

yess! it works! thankyou shadow! and laser!

[ShadowLink64]

yess! it works! thankyou shadow! and laser!

Cool. No problem.

[vanius1977]

in trying to install the decoder, I get a message about CheckControl3.ocx being invalide or absent, what does this mean??

[Hydrogen]

in trying to install the decoder, I get a message about CheckControl3.ocx being invalide or absent, what does this mean??

Have you installed the codex checks?

[vanius1977]

yes now I am getting the message about something called codex check module version 3.1.4.0

Run Codex check -0-

[StormDuch]

I'm so confused....this is all really helpful and I've gotten the part about putting my ID in and all the combos come up...but what do I do from there? Where do I get the actual decoder at? Sorry, I'm dumb

Edited by Laser Wave, 21 February 2008 - 09:14 AM.
No need to quote the first post...

[Sweeney]

I'm so confused....this is all really helpful and I've gotten the part about putting my ID in and all the combos come up...but what do I do from there? Where do I get the actual decoder at? Sorry, I'm dumb

You see where it says "Download Link" in all the stuff you quoted?
Well, it's definitely not there. Nuh-uh. No way.

[StormDuch]

You see where it says "Download Link" in all the stuff you quoted?
Well, it's definitely not there. Nuh-uh. No way.

LOL ok, I'm a total idiot.....I'll go try that! thank you SO much

[Hydrogen]

yes now I am getting the message about something called codex check module version 3.1.4.0

Run Codex check -0-

Please read Mumei's FAQ for more information: http://www.neocodex....showtopic=49276

I think you may not have downloaded the control pad...

[StormDuch]

LOL ok, I'm a total idiot.....I'll go try that! thank you SO much

Sorry to bother...but one more question please? I've now downloaded the decoder....and also put in all the modifier list but when I hit solve, nothing happens? I've put the chars in as 8 because I'm working on the 3 modifier.....am I doing something wrong?

Thank you!

[Sweeney]

Sorry to bother...but one more question please? I've now downloaded the decoder....and also put in all the modifier list but when I hit solve, nothing happens? I've put the chars in as 8 because I'm working on the 3 modifier.....am I doing something wrong?

Thank you!

The chars is never eight.
Read the instructions again, it's explained perfectly well there.

[Waser Lave]

Sorry to bother...but one more question please? I've now downloaded the decoder....and also put in all the modifier list but when I hit solve, nothing happens? I've put the chars in as 8 because I'm working on the 3 modifier.....am I doing something wrong?

Thank you!

All 3 mods aren't 8 for the chars, it depends on what characters are in the modifiers list.

If it only has the letters A-F then it's 6, if there's G in there too then it's 7.

[StormDuch]

All 3 mods aren't 8 for the chars, it depends on what characters are in the modifiers list.

If it only has the letters A-F then it's 6, if there's G in there too then it's 7.

Ok, thank you very much!

Now I have a runtime error 9, subscript out of range? Any ideas?

Nevermind, it worked!!! It worked it worked it worked! LOL I'm so thrilled to have this over! I've spent HOURS! Thank you Laser!!!!!!!!

Edited by Laser Wave, 21 February 2008 - 10:03 AM.
You don't have to quote your own posts lol...

[pshylocke]

Getting a subscript out of range err. I'm trying a 2mod. The target is in the format xxxxxx|xxxxxx|2| does that seem right? Other then that, I have A-E so I have selected 5.

[Waser Lave]

Getting a subscript out of range err. I'm trying a 2mod. The target is in the format xxxxxx|xxxxxx|2| does that seem right? Other then that, I have A-E so I have selected 5.

xxxxxx|xxxxxx|2|

Start Key
Target

[pshylocke]

Thanks, that was it.

xxxxxx|xxxxxx|2|

Start Key
Target