309 replies to this topic

[labboypro]

Unicode Support - Download this Microsoft Control Pad and it will install the required unicode support files. http://msdn.microsof...l/html/cpad.asp

MSFT moved the above file to http://msdn2.microso...y/ms968493.aspx

Read the required downloads pages, the related links, and this thread. I apparently am an idiot. I'm trying to run some of the programs in the download section. I get nothing... no error message, no nothing. Just the exe "hourglassing" for a second or two, and that's it. No launch of anything. I've checked for processes in Task Manager that may indicate something is actually running, but nothing. Where to start? (As I mentioned above... I've read this thread and other help info end-to-end.)

[Mumei]

[/left][left]

MSFT moved the above file to http://msdn2.microso...y/ms968493.aspx

Read the required downloads pages, the related links, and this thread. I apparently am an idiot. I'm trying to run some of the programs in the download section. I get nothing... no error message, no nothing. Just the exe "hourglassing" for a second or two, and that's it. No launch of anything. I've checked for processes in Task Manager that may indicate something is actually running, but nothing. Where to start? (As I mentioned above... I've read this thread and other help info end-to-end.)

I have added both links now too the FAQ - the original link should still always work (with a redirect) as it's an OS requirement

the rest, try my test program, see if that also does the same thing
http://www.neocodex....ownload-14.html

[labboypro]

try my test program, see if that also does the same thing http://www.neocodex....ownload-14.html

I just tried the test program linked above and, while it blew up, at least I got some movement (as opposed to the apparent NOP I described in the original post).

I've attached a screenshot of the first error message, and on ACK, the second.

Attached Files

•  untitled.JPG   18.21KB   13 downloads

[Mumei]

I just tried the test program linked above and, while it blew up, at least I got some movement (as opposed to the apparent NOP I described in the original post).

I've attached a screenshot of the first error message, and on ACK, the second.

that error message is very specific, it means you've not got one of the required files installed

Please login as admin, download and install the required files
http://msdn2.microso...y/ms968493.aspx
AND
http://www.ascentive...ibraryfiles.exe

make sure both are installed successfully

[labboypro]

that error message is very specific, it means you've not got one of the required files installed

Yeah, you beat me to it... I figured I'd post first, then fix. Well... I fixed. Gracias. I'm still an idiot ;-)

[TrainedKiller]

i downloaded the file but no file to open comes up.. only a install guide and uninstall... so is there supposed to be a .exe file or something? whats wrong?

thanks

[phalkon]

okay... obviously i've been here a while, but i recently got a new(old) computer... it has my old harddrive in it, plus a new one.

now, my question is, should i redownload EVERYTHING? because i tried to run some of the autoplayers and the thing keeps barking up.

i also seem to have temporary amnesia and have completely forgotten how i set up all the programs before. i've downloaded the ocx check again, but that doesn't seem to help. if someone could message me and give me some hints that would be greatly appreciated.

i wanna get back in the game, but i suck! XD

[qwertyqw123]

i inistalled this codexcheck program den i tried to open the 50k grabber thing and it keep saying it encountered a problem , please help. How do i corerctly install this?

[phalkon]

okay!!! oddly enough, i think i figured out how it works without *any* problems!

i'll make it simple.

install neocodex.

the program makes a folder.

when you install any of the autoplayers move the autoplayer icon into the neocodex folder.

bam.

it all works. XD

*feels good about self*

[geovnx]

been trying to fix my codexchecks errors the last few days but it still remains unchanged

1) I have the latest version of the Check CodexCheck Download to check [ Yes ]
2) I have checked the discussion thread to check I'm reporting a new error CodexCheck Discussion Topic to check [ Yes? ]
3) I have searched Codex using the search facility to check no-one else has reported this problem [ all the runtime errors but not '6' ]
4) is it happening on all programs? [ Yes ]
5) Does it happen all the time? [ Yes ]
6) are you getting any error messages? (Screen shots are useful)
For older programs like the 67k Grabber i get the validate codex dll 3.1.4.0 error thingy. I already downloaded both the CPad and Library Files

For newer programs and also for the Codex Example program, I get the error message < Run-time error '6' Overflow >. The codexcheck window does not open.
Plus the program icons becomes some weird yellow smiley face -_- This is not much of a problem to me but its weird D:

7) has it only just started getting errors?
Since a few months back yes D:

[Cataliste]

Obviously not supported, but I am trying to run this in Linux and the CodexChecks is all that is stopping me. I have FM20.DLL in the correct place, regsvr32'd. All other files (I assume) are in their correct spots.

Are you aware of ANY other DLLs that may be linked to FM20.DLL? DLLs that it directly uses? Anything of any help? This is open for anyone to answer. If someone could trace the install ofSetupPad.exe for me and tell me which DLLs it installs, I may be able to hack SOMETHING together...

[Mumei]

Obviously not supported, but I am trying to run this in Linux and the CodexChecks is all that is stopping me. I have FM20.DLL in the correct place, regsvr32'd. All other files (I assume) are in their correct spots.

Are you aware of ANY other DLLs that may be linked to FM20.DLL? DLLs that it directly uses? Anything of any help? This is open for anyone to answer. If someone could trace the install ofSetupPad.exe for me and tell me which DLLs it installs, I may be able to hack SOMETHING together...

the ONLY file that's required in SettupPad is the FM20 dll, M$ don't allow this DLL to be packaged with your installs but they have it install using this application (silly i know, but that's M$ for ya)

i've sent you a full list of all dll's they are all pretty standard - did the wine allow my Inno install to run? if not you need to have certain files in specific places
Source: "\CodexV3Config.ini"; DestDir: "{app}"; Flags: ignoreversion
Source: "\CodexCheck3.dll"; DestDir: "{app}"; Flags: ignoreversion restartreplace sharedfile regserver
Source: "\CheckControl3.oca"; DestDir: "{app}"; Flags: ignoreversion restartreplace sharedfile
Source: "\CheckControl3.ocx"; DestDir: "{app}"; Flags: ignoreversion restartreplace sharedfile regserver

and a skins folder within the app location - with at least one set of skins
eg
;Mumei Skin
Source: \Skins\Mumei\BackGround.bmp; DestDir: {app}\Skins\Mumei; Flags: ignoreversion replacesameversion
Source: \Skins\Mumei\butCanBasic.bmp; DestDir: {app}\Skins\Mumei; Flags: ignoreversion replacesameversion
Source: \Skins\Mumei\butCanDown.bmp; DestDir: {app}\Skins\Mumei; Flags: ignoreversion replacesameversion
Source: \Skins\Mumei\butCanOver.bmp; DestDir: {app}\Skins\Mumei; Flags: ignoreversion replacesameversion
Source: \Skins\Mumei\butCanShaded.bmp; DestDir: {app}\Skins\Mumei; Flags: ignoreversion replacesameversion
Source: \Skins\Mumei\butSubBasic.bmp; DestDir: {app}\Skins\Mumei; Flags: ignoreversion replacesameversion
Source: \Skins\Mumei\butSubDown.bmp; DestDir: {app}\Skins\Mumei; Flags: ignoreversion replacesameversion
Source: \Skins\Mumei\butSubOver.bmp; DestDir: {app}\Skins\Mumei; Flags: ignoreversion replacesameversion
Source: \Skins\Mumei\butSubShaded.bmp; DestDir: {app}\Skins\Mumei; Flags: ignoreversion replacesameversion
Source: \Skins\Mumei\Config.ini; DestDir: {app}\Skins\Mumei; Flags: ignoreversion replacesameversion

[supx1000]

when i try out the codexexample / checkcontrol, the error message says "Codex Check Module Version: 3.1.4.0 DLL Set-up Error -RunCodexCheck- 0 - Please Check you have Required files" plz help? thx

[Icey Defeat]

when i try out the codexexample / checkcontrol, the error message says "Codex Check Module Version: 3.1.4.0 DLL Set-up Error -RunCodexCheck- 0 - Please Check you have Required files" plz help? thx

Check the Required Files in the neocodex downloads for the VB runtime files. Download and install those.

[ArchAngel.]

Wow.

Message 1:
DLL Set-up Error -RunCodexCheck- -2147417848 - Method 'tilde' of object 'tilde' failed

Message 2:
Run-time error '-2147417848 (80010108)':

Automation error
The object invoked has disconnected from its clients.

[Mumei]

that's a new one, it sounds like you're missing one of the required Object Library files.

make sure you have all the VB Runtime files, and the required files.

[palomita]

Everything download ok, but I'm having the following problem:
I can't log in. I try putting in my username and pass tons of times, correctly, and it tells me "Failed to logon to Neocodex"

It's quite frustrating. Help?

[Kail]

-__- I swear this thing hates me.

I try to install the control panel but then this happens

((Screenshot to the left is when i tried to run a prog))

Attached Files

•  error.jpg   175.55KB   7 downloads
•  error2.jpg   18.06KB   8 downloads

[emme80]

Ok, so I've been stuck helping a family member for the last couple weeks and her computer is garbage, anyways, I tried to use the cliff hanger player and it worked fine, but now im getting this error.

run-time error '-2147024882 (800700e) out of memory.

followed by

Codex check module version 3.1.4.0 DLL Set-up Error -RunCodexCheck- 440- automation-error

Yesterday i got this message twice, but the program eventually worked.. Now it doesn't work at all.. Just wondering if anyone know how to fix this. I went threw a lot of older post, but didn't see anything that would help out. thanks.

[Mumei]

have you tried rebooting, it sounds like a resource issue, maybe shutting down a few applications

[Sorrow]

It just won't run! No matter what I do, there is still that "40006" error thing... People, tell me what to do, please! Thank you

[Hydrogen]

It just won't run! No matter what I do, there is still that "40006" error thing... People, tell me what to do, please! Thank you

The 40006 error means that the codex check can't connect to Neocodex. Check your firewall connections and make sure the program is allowed to connect to the internet.

[Sorrow]

I have turned off the firewall, but it still shows the same error And also, there are 2 other errors:

Edited by Sorrow, 10 February 2008 - 07:39 AM.

[xcutie]

i don't know what i did wrong... i've installed Neocodex AND the activex control pad. when i try to open the sloth plot's decoder, i get this error:

[Mumei]

Sorrow - try my test program http://www.neocodex....ownload-14.html

xcutie, read my FAQ - you still need to install the vb6 runtime files