Haven't got a thing on attic, missed about 15 so far is there anyway to change the settings so it buys quicker?
Attic keeps missing
#1
Posted 22 July 2013 - 10:21 AM
#2
Posted 22 July 2013 - 10:33 AM
Blame Shrouded.
(Use EC2)
#3
Posted 22 July 2013 - 10:34 AM
Just set everything Attic related to 0.1 and 0.2 or greater.
I'll warn you though, the Attic is highly contested so it's not unusual to miss tons of things there.
#4
Posted 22 July 2013 - 10:49 AM
Just set everything Attic related to 0.1 and 0.2 or greater.
I'll warn you though, the Attic is highly contested so it's not unusual to miss tons of things there.
Is that safe?
#5
Posted 22 July 2013 - 10:59 AM
Blame me, I got everything.
#6
Posted 22 July 2013 - 11:13 AM
Blame me, I got everything.
Are you using my Suite? All day I see reports of grabs non stop. Someone's using it to kill the attic.
#7
Posted 22 July 2013 - 11:46 AM
Is it odd the that I have mine set at .01 and haven't been frozen yet? The times are all fine 280-700ms. (Unless 280 is too low).Just set everything Attic related to 0.1 and 0.2 or greater.
I'll warn you though, the Attic is highly contested so it's not unusual to miss tons of things there.
As for safety of the .01-.02 try messing around with it and seeing which settings work best for you.
Edited by Satsuki, 22 July 2013 - 11:47 AM.
#8
Posted 22 July 2013 - 12:05 PM
Are you using my Suite? All day I see reports of grabs non stop. Someone's using it to kill the attic.
Nope, not me. I may have an idea who possibly.
#9
Posted 22 July 2013 - 02:36 PM
ok, whats ec2? up to 30 misses and not a single item yet.
#10
Posted 22 July 2013 - 02:50 PM
It's a VPN from Amazon: http://www.neocodex....ing-amazon-ec2/ (there's the guide for it)ok, whats ec2? up to 30 misses and not a single item yet.
#11
Posted 22 July 2013 - 03:36 PM
Are you using my Suite? All day I see reports of grabs non stop. Someone's using it to kill the attic.
I'd like to see those reports if you don't mind :3
#12
Posted 22 July 2013 - 09:34 PM
I'd like to see those reports if you don't mind :3
Don't show this guy, he has a small donger.
#13
Posted 22 July 2013 - 11:19 PM
Don't show this guy, he has a small donger.
At least he's not afraid to raise it.
#14
Posted 22 July 2013 - 11:21 PM
At least he's not afraid to raise it.
I didn't think he had a choice in these things.
#15
Posted 23 July 2013 - 06:32 AM
She got on top and just wouldn't stop.
#16
Posted 23 July 2013 - 06:48 AM
my autobuyer isnt even going for anything in the attic.
#17
Posted 23 July 2013 - 07:43 AM
She got on top and just wouldn't stop.
For all 15 seconds.
my autobuyer isnt even going for anything in the attic.
This depends on when you're refreshing, how fast whatever you're using is and if it even sees the items. They're probably already being bought out before your ABer even sees the items...
#18
Posted 23 July 2013 - 07:54 AM
For all 15 seconds.
This depends on when you're refreshing, how fast whatever you're using is and if it even sees the items. They're probably already being bought out before your ABer even sees the items...
#19
Posted 23 July 2013 - 08:37 AM
page delay is 1.0-1.2, refreshes from 52-59, buy delay is .3-.5
#20
Posted 23 July 2013 - 08:41 AM
page delay is 1.0-1.2, refreshes from 52-59, buy delay is .3-.5
And what are you using the ABer on?
#21
Posted 23 July 2013 - 08:47 AM
do you mean windows or mac? if so, mac
#22
Posted 23 July 2013 - 09:15 AM
page delay is 1.0-1.2, refreshes from 52-59, buy delay is .3-.5
wayyyyy too slow. Use .01-.1 at the max.
#23
Posted 23 July 2013 - 10:49 AM
for what? and it used to get plenty of stuff no problem
so i just fixed my times and watched my ABer go to the attic and refresh there from :49-:59 and it it didnt say there were items in the attic until the next minute and then i got this "2013-07-23 14:46:03 - Missed Pink Eyrie Morphing Potion: Sold out." and no other misses. why does it seem like timing is so far off, i dont think its my settings because that miss was a full 10 seconds after the attic was supposed to restock according to the ABer
Edited by kwaugh96, 23 July 2013 - 09:29 AM.
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users